Huffy Disney Ride On Bedienungsanleitung Seite 7

STEP - Attaching Front
6
Bow:
1. Position front Bow as shown so
that Lock Tabs line up with
A
body slots .
B
2. Holding Bow at the sides
push in so that Bow snaps into
position.
3. Gently pull out to make sure
bow does not come loose.
STEP - Connect the Battery
7
Thermal Fuse and install Seat:
1. Connect the Battery Thermal
Fuse A firmly and securely as
shown.
2. Insert the two rear Seat Tabs into
recess slots.
3. Secure the Seat by turning
the Lock Knob
B
(counter clockwise to loosen)
Assembly
clock-wise
B
B
A
A
EN
6
7
7