Huffy Disney Ride On Bedienungsanleitung Seite 10

GENERAL:
The vehicle should be checked for damage, missing or badly worn parts before each
use. If any part of the product does not operate properly – discontinue use.
• Check the tightness of the fasteners before each use. Replace any fasteners that are damaged.
• Inspect the product frequently. Failure to inspect the product and to make repairs or
adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are
correctly assembled and adjusted as written in this manual and any "Special Instructions".
• Immediately replace any damaged, missing, or badly worn parts.
• Make sure all fasteners are correctly tightened as written in this manual and any "Special
Instructions". Parts that are not tight enough can be lost or operate poorly. Over tightened
parts can be damaged. Make sure any replacement fasteners are the correct size and type.
• Check the tightness of the wheels.
NOTE: If the drive wheel is not tight, it will not engage the gears and the vehicle will not run.
• Ensure the battery bracket is securely in place before use.
• Prolonged exposure to UV-rays, rain, and outdoor elements may damage the enclosure
materials. Store the vehicle indoors when not in use. Keep it away from sources of heat, such as
stoves and heaters.
• Keep the product clean and free of dirt, dust and water. This will prolong the useful life of the
product.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax
furniture polish. Do not use automotive wax, abrasive cleaners or wash the vehicle with soap
and water.
NOTE:
If the instructions in this manual or any "Special Instructions" are not sufficient for you,
please contact customer service.
CAUTION:
Self-locking nuts and other self-locking devices may lose their effectiveness when
re-used.
10
Maintenance Repair and Service
EN