Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Evoflex EBE100:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
Evoflex Belt Extender
I N S TA L L AT I O N A N D U S E R ' S I N S T R U C T I O N S
These instructions provide important information for the safe use and maintenance
of all Bodypoint Evoflex Belt Extenders. Give these instructions to the user or their
caregiver and review them to ensure that they are understood.
Optional Bodypoint belt mounting hardware may be used for mounting to wheelchairs
and seating systems.
This product is intended for mounting positioning belts and harnesses. It is NOT
intended for use as a transportation safety device.
Warranty: This product carries a limited lifetime warranty against defects in workmanship
and materials arising under normal use by the original consumer. Contact your supplier
or Bodypoint for warranty claims.
For more information on Bodypoint products and a list of distributors outside the USA
go to www.bodypoint.com.
558 First Ave. S., Suite 300 | Seattle, WA 98104 | 206.405.4555 | 800.547.5716 | www.bodypoint.com
© 2020 Bodypoint, Inc. All Rights Resereved.
A R T N O . E B E 1 0 0
PACKAGE CONTENTS
• 2 Evoflex Belt Extenders
• M6 x 8mm Screws
• M6 Low-profile flange nuts
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
en
BPI105-en 2020.1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Bodypoint Evoflex EBE100

  • Seite 9: Verpackungsinhalt

    USA befinden sich auf der Webseite www.bodypoint.com MDSS GmbH Schiffgraben 41 D-30175 Hannover Germany 558 First Ave. S., Suite 300 | Seattle, WA 98104 | 206.405.4555 | 800.547.5716 | www.bodypoint.com © 2020 Bodypoint, Inc. All Rights Resereved. BPI105-de 2020.1...
  • Seite 10 VERPACKUNGSINHALT (separat zu erwerben) Gurtverlängerungen können mit Bandklemmen (Art.-Nr. HW320), Rahmenklemmen (Art.-Nr. HW310), Sitzmontagehalterungen (Art.-Nr. HW200) oder T-Nuten-Befestigungselementen am Rollstuhl befestigt warden (Art.-Nr. HKA6 & HKA10. INSTALLATION Gurtverlängerung am Evoflex befestigen. Die Federscheibe wird nicht verwendet. 4mm (5/32”) So lässt sich der Gurt nicht drehen: Stift zeigt nach innen.

Inhaltsverzeichnis