Beyerdynamic Verio 200 Bedienungsanleitung Seite 4

BOX CONTENTS
� Charging case
� Earphones L/R
� USB-C to USB-A charging cable
Quick Start Guide and Compliance Booklet
�
REMOVE FROM THE PACKAGING
AND PLACING
� Remove the earphones
from the charging case .
Remove the paper
protecting the charging
contacts located under
each earphone . After-
wards you can place
the earphones into the
charging case to charge
the integrated batteries .
Please refer to the chapter
"Charging" .
� Place the earphone
onto your ear .
The earphone fits correctly
�
when it rests gently over
the top of your ear .
Correct fitting position .
�
VERIO 200 — Open True Wireless Earphones
CHARGING THE BATTERIES
The earphones are charged via the battery of the
charger . For charging, we recommend that you only
use the supplied USB cable .
Please fully charge the batteries in the charger and
earphones before using the VERIO 200 for the first
time .
� Connect the charging
case to a power source
with the supplied
USB-C cable .
A 10-minute charge of the
�
earphones will offer 1 hour
of playtime . Up to 8 hours
of total playtime with fully
charged earphones . With
additional 27 hours with
charging case .
Remarks on the life of Li-ion batteries
When fully charged, disconnect the USB cable from
�
the charger and the product .
CAUTION! High temperatures, especially with a high
�
charge level, can cause irreversible damage .
� If the battery is not used or is stored for extended
periods of time, it is recommended to charge it to
approx . 50 % and store it at no more than 20 °C .
Switch off the battery-powered product after use .
�
4