PEAKnx Controlmicro Kurzanleitung Seite 14

Panel mounting and installation


Detailed instructions can be found on the supplied USB flash drive.
Note:
Avoid damage to the panel due to incorrect use!
▪
Do not use device in safety-relevant, humid, dusty, or vibration-loaded environments
and not under direct sunlight.
▪
Do not allow small children to operate the device!
▪
Do not make any changes, attachments, or conversions to the device
Delivery
▪
Controlmicro panel
▪
USB flash drive: YOUVI Basic software package, Controlmicro user manual
▪
Brief instructions for commissioning the panel and software
▪
Connectors for power supply (only 24 V variant; PNX13-10001) and KNX
▪
Circuit board for network connection
▪
Screws to secure the panel against theft, including tools
▪
Adapter cable from USB type C to USB type A
Panel mounting and installation
Important safety and handling information
The Controlmicro may only be installed and commissioned by qualified electricians!
Observe the national regulations applicable in your country regarding installation,
functional testing, repair, and maintenance of electrical products!
▪
Observe the "Five Safety Rules" (DIN VDE 0105, EN 50110) and apply them correctly:
− Disconnect mains
− Prevent reconnection
− Test for absence of harmful voltages
− Ground and short circuit
− Cover or close off nearby live parts
14
Caution
Warning