Chefman Boils Faster RJ11-17-TCTI-V2-RL-EU Benutzerhandbuch Seite 15

OPERATING INSTRUCTIONS
display. When KEEP WARM time ends, the kettle will go into Standby
mode; the display will still be on and the indicator lights will be white.
After 3 minutes with no action, the unit will go into Sleep mode with all
lights on the display dimmed.
If you wish to turn the KEEP WARM function off, press and hold both the
up arrow button and the START/STOP button for 5 seconds (to turn it
back on, press and hold the same two buttons for 5 seconds). With the
KEEP WARM function off, the indicator lights will turn green and the word
READY will display after the steep timer finishes. Lifting the kettle from its
base or pressing any button will return it to Standby mode.
Memory Function
The kettle features an internal memory that lets you remove the kettle
from the base without the unit turning off. Instead, Heating or KEEP
WARM (depending on which mode the unit was in) will pause, and the
kettle will continue heating or warming when it's returned to its base. This
is true so long as the temperature has not dropped by more than 10°C
during the time the kettle was without power. If it has dropped by more
than that, the kettle will go into Standby mode.
Boil-Dry Protection
The kettle comes equipped with boil-dry protection. While you should
never heat the kettle without water at least to the MIN line, should the
unit go dry or start without water, it will automatically shut off completely
to avoid damaging the heating element. It will not come back on, even
if you replace it to the base, until it has cooled down. To quickly cool it
down, add cold water to the kettle.
15