Operating Instructions - Chefman Boils Faster Rj11-17-Tcti-V2-Rl-Eu Benutzerhandbuch

OPERATING INSTRUCTIONS

BEFORE FIRST USE
1. Remove all packaging and materials. Be sure that all parts are
included before discarding any packaging.
2. Pull out the power cable from the compartment under the base, and
place the base on a flat surface. (Make sure the power cable comes
out of the opening in the base so the unit can sit level.)
3. To rinse the pot of any manufacturing residue, "brew" a pot of plain
water without tea. To do so, lift off the lid and fill the kettle with
water to the MAX line.
4. Put the lid with the infuser attached (but empty) back in the kettle.
Place the kettle on the base unit, and plug it into a power socket.
5. The kettle should default to the BOIL preset; if not, use the arrow
buttons to set it to BOIL, then press START. The LED indicator lights
will turn red, and the display will show the average live temperature
as the water heats.
6. After the boil, the unit will automatically switch to KEEP WARM, and
the LED indicator lights will be green. At this point, empty the kettle,
then rinse the kettle with clean water. It is now ready for use.
NOTE: Never fill the water above the MAX line or below the MIN line
indicated on the kettle.
10