oneConcept 10029987 Bedienungsanleitung Seite 21

Size: W148.5 x H176 mm
Scale 1:1
TEMPLATE BORDER
CAUTION
. Do not install the appliance over a heat source.
. Test the radio reception before installation.
. Install the appliance far from the noise sources.
Mounting Material - Using Spacers
.
4 Spacer
.
4 Screw (Ø3x45mm)
STEP 1
Align the template border marked "FRONT" along the front edge of your cabinet.
Fix the template to the cabinet with adhesive tape.
Make a notch to the bottom of the cabinet as marked '
Remove the template after you finish marking.
STEP 2 - Using Spacers
Cabinet
Take out the top plate from the
unit.
Fasten the screw through the
Spacers
holes of the top plate with the
Top Plate
spacers in between to the bottom
of the cabinet as illustrated.
Screw
STEP 3
Slide the unit to fit in the top plate mounted in the
cabinet.
Mounting Material - Not Using Spacers
.
4 Screw (Ø3x16mm)
' on the template.
STEP 2 - Not Using Spacers
Take out the top plate from the
Cabinet
unit.
Fasten the screw through the
Top Plate
holes of the top plate to the
bottom of the cabinet as
Screw
illustrated.
FRONT