LEGRAND In One PRO 21 7756 37 Bedienungsanleitung Seite 4

(1) Learning: action of associating products to be controlled simultaneously from a central point.
The procedure on page 8 describes how to perform this association.
(2) Scenario: the set of products (actors) that are associated with a control button.
To save a light level during the learning, step 2 of Learning the scenario becomes :
Press LEARN
Key
The indicator lamp The indicator lamp
goes off blinks slowly
Learn scenario
Step 1 : Start the learn phase (on the LEADER)
Press LEARN
Step 2 : Add an actor to the scenario (on the ACTOR)
Press LEARN
To add a number of products to the scenario, repeat operations
Step 3 : Record the scenario (on the LEADER)
Press LEARN
Press the ON control
button which should be
associated with the leader
The indicator lamp
blinks quickly
7
Press the command key that is to
control the scenario
Press the command key that is to be
associated with the leader
and for each actor.
The indicator lamps of all the products go off.
The scenario is recorded.
8
Press the ON or OFF control
button (long press) to adjust the
required light level
The indicator lamp
flashes