Inhaltsverzeichnis; Warning Notices - Velleman 8040 Bedienungsanleitung

Warnings and Contents
Thank you for purchasing this Velleman High-end mono mosfet power amplifier.
Please read the instructions carefully so that you can use the unit correctly.
!

WARNING NOTICES

CHECK WHETHER THE MAINS VOLTAGE IS CORRECT FOR THE UNIT.
IN ORDER TO AVOID ELECTRIC SHOCKS,
THE POWER-CORD MUST BE REMOVED BEFORE OPENING THE UNIT .
THE STANDBY SWITCH IS IN THE SECONDARY POWER SUPPLY CIRCUIT.
THIS MEANS THAT THE UNIT IS NOT COMPLETELY ISOLATED FROM
MAINS WHEN THE UNIT IS IN STANBY.
About the power cord:
It is possible that in certain countries or regions, the mains plug is different to the one
supplied. In such a case a different plug can be fitted, but be careful to ensure that the
blue wire is connected to neutral, the brown to live, and the yellow/green to earth. Or ask
your dealer for a suitable power cord.
AC Power :
Please check the AC Power indication at the back of the unit.
For 100Vac to 120Vac, use the 115Vac setting.
For 220Vac to 240Vac, use the 230Vac setting.
GUARANTEE
This product is guaranteed against defects in components and construction from the moment it is
purchased and for a period of ONE YEAR starting from the date of sale.
This guarantee is only valid if the unit is submitted together with the original purchase invoice.
VELLEMAN Ltd limits its responsibility to the reparation of defects or, as VELLEMAN Ltd deems
necessary, to the replacement or reparation of defective components. Costs and risks connected to
the transport, removal or placement of the product, or any other costs directly or indirectly connected
to the repair, will not be reimbursed by VELLEMAN Ltd. VELLEMAN Ltd will not be held responsible
for any damages caused by the malfunctioning of a unit.
IMPORTANT: Do not throw away the original packaging. Warranty will be void if the unit
is returned in another packaging than the original.
CONTENTS
FEATURES .................................................................................................................................. 5
SPECIFICATIONS ...........................................................................................................6
CONNECTION ............................................................................................................................. 7
OPERATION ...................................................................................................................8
TROUBLESHOOTING ....................................................................................................9
4