Maintenance - Ruris Rxh999 Bedienungsanleitung

The carburetor is flooded with fuel.
Engine speed
decreases
Low results
Collector bag
Noise
vibration
The cutting roller is unbalanced.
If your device needs to be replaced after prolonged use, do not put it in the household
waste, but dispose of it in an environmentally safe way.
Caution: Be sure to disconnect the spark plug plug before performing repairs
or maintenance.
NOTE: When tipping the machine, empty the tank. Do not turn the machine more than
90 degrees in any direction or leave the machine upside down for long periods of time.
Oil can leak into the top of the engine and cause starting problems.
●
Change the engine oil after the first 5 hours of operation, which is the break-in
period, then every 25 hours of operation or every 6 months. Read and follow the
instructions carefully.
● Check the air filter after 25 hours under normal conditions. Clean it every two hours
24
Incorrect spark plug gap
Faulty ignition module
Cutting depth too high
Grass too big
Channel ejector blocked
Clogged air filter
Cutting depth too small
Used roll.
Collector bag is full / clogged
Channel ejector blocked
Assembling bodies loosened
The roll is loose

11. MAINTENANCE

Set the correct distance
between the electrodes.
Remove the filter element and
pull the starter rope
continuously until the carburetor
clears after reinstalling the filter
element.
Contact your service agent.
Set to shallower cutting depth
Mow the grass
Clean
Clean
Set to higher cutting depth
Work on it or replace it
Empty/clean
Clean
Adjust
Squeeze
Balance
EN