Work Area - Ruris Rxh999 Bedienungsanleitung

If the machine starts to vibrate abnormally (check immediately).
Inspect for damage.
Replace or repair any damaged parts.
Check and tighten any loose parts.
When the engine is off, the ignition switch must be in the OFF position (OFF or 0 position).
Close the petrol valve OFF or 0 position.
Do not change the engine speed, if the engine does not operate within the parameters,
contact an authorized RURIS service.
During use, the scarifier produces vibrations. Limit your exposure to them.

WORK AREA

Keep the work area clean and well lit. Crowded and dark areas can lead to accidents.
Clear the area where the machine will be used and remove all objects such as stones,
toys, sticks and wires that could be caught and thrown. It could cause damage to the
machine or injury to the operator.
Do not operate the machine in areas with flammable liquids, gases or dust. The appliance
creates sparks that can ignite.
CAREFUL! Gasoline is highly flammable and explosive.
Store fuel in containers specially designed for this purpose.
Refuel outdoors only and do not smoke while refueling.
Fuel before starting the engine. Never remove the tank cap or add gasoline while the
engine is running or when the engine is hot.
If gasoline has been spilled, do not attempt to start the engine, move the machine away
from the spilled area to avoid creating any ignition source until the gasoline vapors have
dissipated.
Use quality gasoline from authorized PECO stations.
Keep the machine off before making any adjustments, changing accessories, or storing
gasoline tools. Preventive safety measures reduce the risks of accidentally starting the
car on gasoline.
8
EN