Beatbot AquaSense Pro Bedienungsanleitung Seite 12

7.3 Before Cleaning
Before cleaning, make sure the robot is turned on and has enough power. The panel indicator
on the robot should be solid green when the robot is fully charged (
(If you have connected the robot to the APP, you can also check the power level within the APP).
Set the cleaning mode, and the selected mode button will show solid white (
Before entering the water, place the robot on a level surface and wait for about 5s for it to
(
calibrate
After placing the robot in the water, it will start cleaning automatically (
1
3
EN
Before entering the water, it is crucial to place the robot on a level ground and to wait for
about 5s for it to calibrate. By following these steps, you ensure maximize the effectiveness
of the robot's cleaning path.
Tips
).
3
Before cleaning, please make sure there are no foreign objects such as towels or toys
in the pool.
Avoid animals and people
from entering the pool
during cleaning.
2
4
5s
Please turn off the pool circulation
or heating system before cleaning.
10
).
1
).
2
).
4