Caractéristiques Techniques; Useful Information - Atlas Copco Ltv39-2 R200-Fs Sicherheitshinweise

Safety Information
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
Additional safety information regarding portable air
tools:
• CAGI 2528 - B186.1, SAFETY CODE FOR POR-
TABLE AIR TOOLS, available from Global Engi-
neering Documents at https://global.ihs.com/ or call
+1 800 447-2273. In case of difficulty in obtaining
ANSI standards, contact ANSI via https://
www.ansi.org/
Signs and Stickers
The product is fitted with signs and stickers containing impor-
tant information about personal safety and product mainte-
nance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.

Useful Information

Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Atlas Copco
website.
Please visit: www.atlascopco.com.
6 © Atlas Copco Industrial Technique AB - 9846 0024 00
ServAid
ServAid is a portal that is continuously updated and con-
tains Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Product Safety Video for Nutrunners
Learn more about safety features on Atlas Copco nutrunners
and what measures the operator has to take for a safe opera-
tion. Click the link or scan the QR code below to view the
video:
https://www.youtube.com/watch?v=FAh6yttvUpw
Caractéristiques techniques
Données produit
Pression de service maximum
Vitesse à vide
Poids
Déclarations
Responsabilité
De nombreux événements dans l'environnement d'exploitation
peuvent affecter le processus de serrage et nécessiteront une
validation des résultats. Conformément aux normes et règle-
ments applicables, nous vous invitons par la présente à con-
trôler le couple installé et le sens de rotation après tout évène-
ment susceptible d'avoir une incidence sur le résultat du ser-
rage. Voici des exemples non exhaustifs de ces évènements :
• installation initiale du système d'outillage
LTV39-2 R200-FS
7 bar
(100 psig)
120 r/min
( rpm)
3.2 kg
(7.1 lb)