Standby; Button Bar; Close Stand; Restore Defaults - Optelec Compact 6 HD Bedienungsanleitung

Optelec Compact 6 HD & Compact 6 HD Speech

Standby

The standby time sets the time after which the Compact 6 HD goes into standby mode to conserve
power. Pressing any button will take the unit out of standby mode. By default, the standby time is
set to 10 minutes after no button is pressed or no movement of the Compact 6 HD is detected.

Button bar

This menu item enables you to change the button bar position to one of its three positions, auto,
bottom or side. Depending on your preference, you could change the position of the button bar to
the bottom or side of the screen.
The default setting is "Auto". When set to "Auto" the bar position is depending on the accessory in
use. For the Reading Stand this will mean that the bar will be positioned at the bottom of the screen.

Close stand

If the Close stand option is set to Standby, the Compact 6 HD will go to standby when closing the
stand. If the Close stand option is set to Overview and the Camera switch is set to ON, closing the
stand will automatically switch to the Overview camera.

Restore defaults

Tap this menu item if you wish to restore the default settings. You will be prompted if you are sure
to restore the defaults. To restore the defaults select "Yes". To cancel restoring the defaults, select
"No".
45 English