IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
8.2 Remove the inner liner.
8.3 Remove the buckle pad, conceal the buckle in the buckle hole on the seat base.
8.4 Raise the back cushion under the headrest.
8.5 Pull up to take the shoulder pad out from the hole.
8.6 Pull down to take the shoulder pad out. Lower the headrest cloth cover.
8.7 Remove the headrest cloth cover.
8.8 Remove the cloth cover from the seat.
To assemble the soft goods ,reverse the steps above.
WARNING!
Child restraint system (safety seat) without cloth cover cannot be used.
IX. CLEANING AND MAITENANCE
•
After removing foam of the infant insert, please store it somewhere that the child can not access it.
•
Please wash the soft goods with cold water under 30°C.
•
Do not iron the soft goods.
•
Do not bleach or dry clean the soft goods.
•
Do not use undiuted neutral detergent, gasoline or other organic solvent to wash the child seat. It may cause damage to the child seat.
•
Do not twist the goods to dry with great force,it may leave the soft goods with wrinkles.
•
Please hang dry the soft goods in shade.
Produced for Kikka Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in China.
Complies with EN R129.
ENGLISH