KIKKA BOO i-EXPLORE Gebrauchsanweisung Seite 10

IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
I. PARTS
1. Headrest; 2. Belt guidance; 3. Shoulder pad; 4. Shoulder strap; 5. Buckle; 6.Inner cushion; 7. Buckle pad; 8. Adjuster button; 9. Harness adjusting strap; 10. Recline position handle;
11. Headrest adjusting handle; 12. Shoulder straps hole; 13. Shoulder straps; 14. Backrest; 15. Metal yoke; 6. Belt clip.
II. INSTALLATION WITH ADULT SAFETY-BELT (40-105CM)
Rearward Facing: Child height 40cm-105cm | Child weight≤18kg
2.1 Recline the seat to position '4' .
2.2 Put the child seat on installation position with rearward facing.
2.3 Unlock the harness and lift up the inner cushion.
2.4 Pull out the seat belt entirely.
2.5 Pass the seat belt through the seat as shown.
2.6 Pass the seat belt through the seat as shown, put the inner cushion back.
2.7 Insert the metal tongue of car belt into the carseat buckle until you hear a clear "click".
2.8 Pull the belt tightly.
2.9 Using the belt clip to clip it beside the buckle.
2.10 Please check by moving the child seat back and forth to make sure every strap is tight.
2.11 Before using the safety seat, make sure the safety seat is firmly installed and the webbing is not twisted.
III. USING 5-POINT HARNESS TO FIX THE CHILD
3.1 While pressing the harness adjustment button, pull completely the two shoulder harnesses of the child seat.
3.2 Place the child in the child seat and pass both arms through the harnesses.
3.3 Important: The left and right bolts of the 5-point safety seat buckle are combined first.
3.4 Engage the buckle as pictures show. It is not allowed only one side of the 5-point safety seat buckle to be locked.
3.5 Make sure the buckle is properly engaged.
3.6 Pull the retractor belt to the right tightness.
3.7 Make sure the space between the child and the shoulder harness is about the thickness of two fingers.
3.8 Press the red button to disengage the buckle.
WARNING!
Over-relaxed seat belts are not conducive to protect the children's safety.
IV. INSTALLATION WITH ADULT SAFETY-BELT (100-150CM)
Forward Facing: Child height 100cm-150cm | i-Size Booster seat
4.1 Recline the level adjust to level 1,2 or 3.
4.2 Place the child safety seat in the car seat. Pull out the seat belt entirely.
4.3 Shoulder belt must pass through the shoulder belt guide. Waist belt must pass through the lap belt guidings.
4.4-4.5 When installing and adjusting the safety belts, make sure that both the shoulder belt and the waist belt are not twisted and will not keep the safety belts from being properly
positioned. Note: The correct belt position should be above the child's pelvis.
RECLINE ADJUSTMENT
4.6-4.7 Find the red hand lever, pull it up to adjust the position.
4.8 Rearward Facing: Child height 40cm-105cm / Child weigh≤18kg; The safety seat only provide one position for rearward installation. Forward Facing: Child height 100cm-150cm
Only could use position 1,2 or 3.
WARNING!
Do not use forward facing before the child's age exceeds 15 months.
V. 5-POINT HARNESS ADJUSTMENT
5.1 Pass the harness adjustment button; Adjust the harness according to the current situation of the child, make sure there is no twisting.
5.2 To loosen: While pressing the harness adjustment button, pull completely the two shoulder harnesses of child restraint.
5.3 To tighten: Pull down the adjustment webbing and adjust it to the proper length to make sure your child is snugly secured.
VI. HEAD REST ADJUSTMENT
6.1 Pull the headrest adjustment handle.
6.2 Move the headrest up or down to the appropriate height currently.
6.3 Checking the shouder strap height: Make sure that the harness is on the same height as your child's shoulders. Otherwise, move the shoulder strap up or down to the correct slot.
VII. CONCEAL THE HARNESS SYSTEM(SUITABLE FOR CHILD HEIGHT 100CM-150CM)
7.1 Release the 5 - point buckle, pull up the headrest, turn up the back cushion.
7.2 Press the harness adjustment button and loosen the straps.
7.3 Lift the upper flap upward and pull the lower flap forward.
7.4 Store the shoulder harnesses and buckle in their storage compartments.
7.5 Remove the buckle bag.
7.6 Pull the buckle to the back of the seat pad, and then store the buckle and buckle tongues in respective storage compartments.
7.7 Do reattach the snaps to recover the seat pad. The reassembled seat pad is shown as in the picture.
VIII. REMOVE THE SEAT CLOTH COVER
8.1 Press the red button to disengage the buckle.
ENGLISH