T+A G 2000 R Betriebsanleitung Seite 41

Pick-up alignment procedure
Select your choice of either the Rega or the  / Baerwald template from the
accessories supplied with the G 2000 R, and lay it on the disc platter with the
platter spindle engaged in the hole in the template. Loosen the pick-up
cartridge retaining screws slightly, so that the cartridge is free to move in the
slots of the tone arm. Move the tone arm over the pattern of lines on the
template, and align the pick-up cartridge with the template. Now carefully
tighten the pick-up cartridge retaining screws.

Note:
For accurate alignment we recommend using a pencil lead, attached to the end
of the pick-up system with a piece of adhesive tape.
41