T+A G 2000 R Betriebsanleitung Seite 38

Setting the anti-skating
force
38
The anti-skating force is adjusted by the anti-skating screw () on the base of
the tone arm.
The adjustment of the anti-skating depends on the set tracking force. The
appropriate settings can be found in the figures below.
Setting for minimal anti-
skating.
The anti-skating screw is
unscrewed nearly
completely.
For tracking forces between
1,0 to 1,5 gram
Setting for medium anti-
skating.
The anti-skating screw is half
unscrewed.
For tracking forces between
1,5 to 2,0 gram
Setting for maximal anti-
skating.
The anti-skating screw is
screwed in completely.
For tracking forces from
2,0 gram or more.