PNI 480C PRO Bedienungsanleitung Seite 17

Note: The camera will remain in "Test" mode if the menu
appears on the screen.
Quick conguration from the dedicated
TrailCamera application
You can send basic settings to the camera, directly
from the TrailCamera mobile application, for a quick
conguration of it or to receive images by e-mail. You
just need to insert a SIM card with SMS, active internet
and no PIN code (tested in a phone beforehand), turn
on the camera (the switch should be ON) and check
according to the above indications that there is a signal
in the camera.
• Add the phone number of the card installed in the
camera in the Trail camera application.
• Copy the settings in the images below and only
change the phone number and email address, with
those held by you.
• Send the settings to the camera, pressing the "Send"
button.
• The camera will respond with an SMS "SMS
Commands Executed Successfully!"
• Order the "Get a Picture" application and you will
User manual 17 English