PNI 480C PRO Bedienungsanleitung Seite 11

USB connection. Use as Webcam
When the hunting camera is connected via a USB cable,
"MSDC" appears on the screen. Press the MENU key
once, "MSDC" changes to "PC Cam". Now you can use
the hunting camera as a webcam. Press the MENU key
again, the hunting camera exits the PC hunting camera
mode.
Hunting camera setup
Move the ON/SETUP/OFF switch to the SETUP
position. This mode will allow you to congure the hunting
camera. The screen will light up. Press the MENU key to
access the menu. Use the arrow keys to navigate through
the menu and the OK key to conrm.
Notes:
• Read the manual carefully to understand the settings
that must be made for a correct operation of the
hunting camera.
• After each setting, check the operation mode of the
hunting camera.
• A wrong setting can lead to improper operation of the
User manual 11 English