Bellman & Symfon BE2030 Bedienungsanleitung Seite 10

Appendix (EN)
131 Settings
134 Testing the internal microphones
134
Testing the external sound
130
Settings
Bellman Audio Mino has more settings than those you can access in
user mode. By going into the Settings Menu you can adjust settings
that you do not normally need to change or which are adjusted when
first used and never need to be changed again.
Settings Menu
How to get into the Settings Menu.
Start the unit by pressing the On/Off button

Hold down the On/Off button

i
button (7) within 1 second until the
-
T LED (9) starts to blink, you can release both the buttons.
 When the
Press and hold down the T button (12) within 2 seconds of the mo-

ment the T LED (9) starts to blink.
Release the T button (12) immediately once the

out.
You are now in Balance Control mode.
Overview of the Settings Menu
In the Settings Menu you can switch between the different settings by
pressing the button ( ) or the
T 12
button ( ). Each press of
3
M
the button moves you
T
clockwise on to the
next setting in the
list and the
M
button takes you
anti-clockwise
to the previous
setting in
the list.
When you
have finished
adjusting your
settings, give
a short press
on the On/Off
button ( ) to
4
i
return to normal
user mode.
(4).
i
(4) and press down the Volume
T LED (9) starts to blink.
T LED (9) has gone
App
131