Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Main Menu
CAM and
viewing card.
z
*If you have already attached the door
that covers the rear sockets, you will
have to unscrew and remove this to gain
access to the CAM socket.
CA Set-up
This feature allows you to access a pay per view service once you have obtained a
Conditional Access Module (CAM) and a viewing card. Please contact your nearest
pay per view supplier for details.
1.
Switch off the TV and unplug from the mains.
2.
Insert the CAM into the
care not to damage the CAM when inserting.
3.
Insert your viewing card into the CAM.
4.
Connect the TV to the mains and switch on.
5.
Press the
button, then the BLUE button on the remote control to
display the Main Menu.
6.
Press the V and v button to highlight 'Detailed Set-up', then press the OK
button to display the 'Detailed Set-up' menu.
7.
Press the V and v button to highlight 'CA Set-up' in the Main Menu, then
press the OK button to display the suppliers set up menu.
For further information regarding the available services, please contact your pay
per view supplier.
Personal Information
Use this option to enter personal information such as your e-mail name and
address.
1.
Press the
button, then the BLUE button on the remote control to
display the Main Menu.
2.
Press the V and v button to highlight 'Personal Information', then press
the OK button to display the 'Personal Information' menu.
3.
If you wish to change your user name, address or e-mail, press the V or
v button to highlight your chosen option then press the OK button to
display a keyboard. Press the RED button to clear the existing name or
address. Press the V, v, B and b buttons to select the letter or number
you require then press the OK button to display the letter/number in the
name box. Repeat this procedure until the new name is complete then,
after using the V, v, B and b buttons to highlight 'DONE', press the OK
button to return to the 'Personal Information' menu.
4.
If you wish to change the 'MHP Application Font Size', press the V or v
button to highlight 'MHP Application Font Size' then press the OK button
to confirm. Press the V or v button to change the existing font size, then
press the OK button to confirm.
5.
Press the BLUE button repeatedly to remove all menus from the TV
screen.
Advanced Operation
socket on the rear of the TV as shown*. Take
Advanced Operation
19
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
