Installation - Sony KD-32NS200 E Bedienungsanleitung

The Main Menu
z
*If you select 'Satellite name', press the
OK button to display the keyboard
showing the existing satellite name.
Press the RED button to clear the
existing name, then using the V, v, b and
b buttons, select the first letter or
number you require for your new name.
Press the OK button to display the letter
or number in the name box. Repeat the
procedure until the new name is
complete then, after using the V, v, b
and b buttons to highlight 'DONE', press
the OK button. Finally, press the BLUE
button to return to the 'Installation' menu.
**For further information
satellite settings, please contact your
local approved satellite installer.

Installation

This option allows you to allocate a name to your satellite, change the settings, tune
in the programmes or change the order of the stored channels.
1.
Press the
display the Main Menu.
2. Press the v button to highlight 'Installation', then press the OK button to
display the 'Installation' menu.
3. Press the V or v button to select your chosen item on the menu screen
then press the OK button to display the relevant sub menu.
Satellite Set-Up
This menu gives you an overview of the settings of your satellite(s). Press
the V or v button to select your chosen satellite then press the OK button
to display the 'Satellite Set-Up' screen. If you wish to change any of the
settings, use the V or v button to highlight the item you wish to change*,
then press the OK button to confirm. Press the V or v button to alter the
setting then press the OK button to store the new setting. Press the
BLUE button to return to the 'Installation' menu.
Quick Tuning
This option will download all the recommended channels from the Astra
satellite.
Full Tuning
This option enables you to tune in all available channels for each satellite.
Press the V or v button to highlight your chosen satellite then press the
OK button to confirm. A message appears asking you to confirm
scanning. Press the OK button to start the search procedure. As this may
take some time, a progress menu appears on screen to show you the
number of services stored.
Manual Tuning
With this option you can manually add channels to your TV. Press the V
or v button to select your chosen satellite, then press the OK button to
display the 'Manual Tune' screen. If you wish to change the frequency**
or baudrate** settings, press the V or v button to highlight 'Frequency' or
'Baudrate' then press the OK button to display the relevant sub menu.
Enter the new settings using the Numbered buttons on the remote
control then press the OK button to return to the 'Manual Tune' screen. If
you wish to change the Fec** or Polarization** details, press the V or v
button to highlight 'Fec' or 'Polarization' then press the OK button to
confirm. Press the V or v buttons to change the settings then press the
OK button to confirm. Once the desired settings have been input, press
the YELLOW button to display a confirmation message. Press the OK
button to begin the search procedure.
Programme Sorting
Use this option to change the order of the stored channels. With the
'Programme Sorting' menu displayed on the screen, press the V or v
buttons to highlight the channel you wish to move then press the
YELLOW button. Use the Numbered buttons on the remote control to
enter the new programme number for your chosen channel then press
regarding
the OK button to confirm. Repeat this procedure to move other channels,
then press the BLUE button repeatedly to remove all menus from the TV
screen.
4.
Once you have made all the changes you require in the 'Installation'
menu, press the BLUE button repeatedly to remove all menus from the
TV screen.
button, then press the BLUE button on the remote control to
Advanced Operation
Advanced Operation
17