Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Advanced Operation
First nextTView/EPG-Providers in Europe
07 Tue
SWISS
TXT
TPS / RINGIER
12:38
Tue 07. 04 .98
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
This channel has been set for a timer
VPS/PDC
On
Speed
SP
Timer Prog
VCR1
24
Advanced Operation
Using the 'Long Info' menu
This feature allows you set timers and record selected programmes.
1.
Press the V or v buttons to select a future programme from the
programme list.
nexTView
2.
Press the OK button to display the 'Long Info' menu.
3.
Press the V or v buttons to highlight the option you require.
4.
Press the b button to select the
button to return to the previous menu.
The following table explains each option:
Option
To set the timer
To view the timer table
To record a programme
(only for Smartlink VCRs)
icon on the menu. Press the OK
How to use
Press the B or b button to highlight the
Press the OK button to set the timer. Once the
timer is set a clock symbol appears by the
programme in the NexTView menu. Shortly before
the programme starts, a message appears asking
whether you still wish to view the programme.
Press the B or b button to highlight the
Press the OK button to switch the timer table On or
Off. This table can display up to 5 timed
programmes you have set.
Press the B or b button to highlight the
Press the OK button to download the programme
information to the VCR. You can then set up the
following options:
VPS/PDC
Press the B button to select VPS/
PDC. Press the OK button to select
On or Off. When set to On you will
not miss any of the recording
should there be a change in the TV
programme schedule. This only
works if the selected channel
broadcasts a VPS/PDC signal.
Speed
Press the v button to select Speed.
Press the OK button to select SP
for standard play or LP for long
play. With long play you can record
twice as much on a videotape. The
picture quality however may suffer.
VCR Setup
Press the v button to select VCR
Setup. Press the OK button to
select which VCR you wish to
programme.
VCR1 and VCR2.
symbol.
symbol.
symbol.
Choose
between
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
