Basic Operation; Overview Of The Remote Control - Sony KD-32NS200 E Bedienungsanleitung

Basic Operation

Overview of the remote control

Mute button
Press to mute the sound. Press again to
restore.
DIGITAL/ button
Press to switch between digital or analogue
mode.
MEMORY STICK button.
Press to display the 'Memory Stick' menu.
Refer to the 'Viewing Memory Stick pictures'
section of this manual for details.
Buttons 0-9
Press to input the required channel number.
For numbers 10 and above, enter the next digit
within 2 seconds.
GUIDE button
Press to launch digital text or interactive
services.
MODE button
This remote operates not only Sony DVDs and
VCRs, but also those made by other
manufacturers. Press this button to select the
type of equipment you want to control. A green
light appears momentarily to indicate the mode
selected*.
Text button
Press to enter text mode.
EPG button
Press to display the Electronic Programme
Guide when in Digital mode.
Control pad
Use these buttons to navigate through the
menu system of the TV**.
Coloured buttons
These buttons are used for text and Digital
menus. Refer to the relevant sections in this
instruction manual.
Volume + and - button
Press to adjust the volume to the desired level.
MENU button
Press to enter the menu system of this TV.
z
*Before operating your VCR or DVD, you
must enter the correct configuration
code. Please refer to the section
'Remote Control Configuration for VCR/
DVD'.
**When the MODE button has been set
to VCR or DVD, the control pad operates
the main functions of your VCR or DVD.
8
Basic Operation
VIDEO
Press to switch off your VCR or DVD
temporarily. Press again to return to normal
operation.
TV
Press to switch off your TV temporarily. The
Red indicator on the front of the TV will
illuminate. Press again to return to normal
operation.
MEMORY STICK
Input button
Press to select signals from equipment
connected to the TV sockets (refer to
'Connecting optional equipment to the TV').
In Text mode press to keep a page on display.
Press again to cancel.
Previous channel button
While watching analogue TV pressing this
button will return you to the previous channel
you were watching.
While watching Digital TV pressing this button
can also act as an 'EXIT' key and cancel any
Digital text application that may be running.
Screen format button
Press repeatedly to change the screen format.
Info button
Press to display the INFO menu in Digital
mode. When watching analogue programmes
press to reveal information such as programme
number.
When in text mode, press to reveal hidden
information such as answers on quiz pages.
Press once more to clear hidden information.
INDEX button
When in digital mode, press to display the
Channel Index menu.
OK button
Press to display a list of channels on screen.
Press the V or v button to scroll through the list
until the channel you wish to view is
highlighted, then press the OK button to
display that channel on screen.
PROG +/- button
Press
programme.
In Text mode, press to select the next page or
the previous page.
/
button
/
button
/Hold button
to select the next or previous