Removing The Product; Cleaning The Mesh Filter - Home Deluxe Coway Bidet Bedienungsanleitung

cLeaNiNg aNd MaiNtaiNiNg your Bidet

removing the product

1. unplug the power cord from the electrical outlet.
2. close the main water supply valve.
3. Pull the product forwards by holding both sides of the product while
pressing the button at the bottom left of the product, to separate
the product from the installation plate.
unplug the product if it will not be used for a long time.
tips
4. remove the drain plug at the back of the bidet by turning it
counterclockwise by 90 degrees ① and then pulling it forwards ② so that
the water in the hot water tank is drained into the toilet.

Cleaning the MESH filter

1. separate the product from the installation plate.
- Refer to Removing the product (1~3).
2. remove the MesH filter at the bottom left of the product.
- Remove the MESH filter by turning it with a '+' screw driver.
2
1
20