usiNg your Bidet
using the rear nozzle
using the rear nozzle
When seated, press the 'rear cleansing' button on the remote control.
- Cleansing water is ejected for approximately 1 minute and then automatically stopped.
- Automatic nozzle magnetic cleaning is performed for approximately 3 seconds after cleansing when the
nozzle retracts itself.
if the 'rear cleansing' button is pressed again during the cleansing operation, additional rear cleansing is
performed for another minute (1).
While cleansing, users can adjust the water temperature and water pressure according to their preference.
if the seat sensor does not detect a human body, the bidet does not work.
stopping
to stop the current operation, press the 'stop' button.
- This stops all currently operating functions.
using the front nozzle
using the front nozzle
When seated, press the 'front cleansing' button on the remote control.
- Cleansing water is ejected for approximately 1 minute and then automatically stopped.
- Automatic nozzle magnetic cleaning is performed for approximately 3 seconds after cleansing when
the nozzle retracts itself.
if the 'front cleansing' button is pressed again while cleansing, additional cleansing is performed for
another minute (1).
While cleansing, users can adjust the water temperature and water pressure according to their
preference.
if the seat sensor does not detect anyone seated, the bidet does not work.
stopping
to stop the current operation, press the 'stop' button.
- This stops all currently operating functions.
15
15