Indicators And Operation; Led Indicators; Feed Button Operation - Phoenix Contact CLIPLINE UM IA THERMOMARK S1 Anwenderhandbuch

5

Indicators and Operation

Table 5-1

LED indicators

LED
Ready
Status
Ready
Status
Ready
Status
With labels
With continuous media
102934_00_ia
5.1 LED Indicators
Other LED states are described in "Error Messages" on page 43.
Signal
Tone
Green
1 Normal status
–
Red
1
calibrate labels
Orange
–
Flashing
red
5.2

FEED Button Operation

When the FEED button is pressed, the printer feeds through a row of the inserted
labels as far as the tear-off position.
(Exception: when the driver is in TOF backup mode (printer driver: Print tab), the
row of labels is fed through to the next tear-off position when the FEED button is
pressed for the first time.)
If the labels are not fed through as far as the tear-off position or labels are skipped,
carry out a printer selftest (see "Printer Selftest and Calibrating Labels" on
page 42).
When printing on continuous media, the print media is fed through up to a certain
length when the FEED button is pressed.
Status Description
Printer ready.
Printer printing test page (see "Printer
Selftest/
Selftest and Calibrating Labels" on
page 42).
Printer downloading firmware.
Indicators and Operation
41
PHOENIX CONTACT