Dcc Configuration; Display Configuration; Instructions For Using The Software „Piko Messwagen Configtool; Update / Reset - PIKO H0 MESSWAGEN Bedienungsanleitung

5.2.3 DCC Configuration

Assign a DCC address to the car or setup a sniffer address of a locomotive, to which the car should listen then (only in DCC!)

5.2.4 Display Configuration

The car shows eight presetted displays by default. Here you can setup all displays freely, up to 15 displays in total.
Additionally the Software „PIKO Messwagen ConfigTool" can be checked for updates with a small button on the programs main page.
5.3 Instructions for using the software „PIKO Messwagen ConfigTool"

5.3.1 Update / Reset

Update
Reset
In the same window as for update you also can reset you car to factory settings. Touch the related button and confirm the security query with OK.
40
To do a firmware update of the measure car please download the file „MesswagenComplete_v1_00.pfw"* and
save it on your computer.
You can find it on the same page like the other software packages.
*the firmware version number will be different from the shown one when an update is available.
Now search this downloaded file by pushing on the three small dots next to the empty line. Confirm this file and
press "Update". The car will be updated and the program will return to its main page.
Firmware
Additionally this window also shows the currently used firmware version of the car for your reference. Check
frequently for updates!