Wifi Functionalities; The Piko Smartmeasure Car / Functions Of The Single Car - PIKO H0 MESSWAGEN Bedienungsanleitung

2.5 WiFi functionalities

AccessPoint / Ad-Hoc network
The PIKO SmartMeasure Car works as a so called „access point" that opens its own WiFi network, where up to 4 devices can be connected with.
By factory setting the WiFi name ("SSID") is "PIKO-Messwagen_H0". A password is not assigned.
Station Mode
When this method is activated* the car also can be connected with an existing home-network (via router).
The login-data must be available, as an automatic connection setup via push-button-method is not available.
* For configuration you need the free software "PIKO Messwagen ConfigTool" as minimum.
AccessPoint and StationMode in parallel operation
The PIKO SmartMeasure Car can also be used with both WiFi mode activated.
In total up to four devices can receive data from the car. That means, while being connected with your home network (via router) the car also can
send data to three other devices.

3. The PIKO SmartMeasure Car / functions of the single car

32
Behind one side of the sliding
doors of the PIKO
SmartMeasure Car is the
display, push-buttons are on
the opposite side, together
with an USB port.