Prosharp BAUER ADVANTEDGE Maschinenhandbuch Seite 7

All PROSHARP BAUER ADVANTEDGE grinding wheels are sold separately. Change the wheel according
to the instructions. The wheel type (hollow) and wheel life is monitored on the HMI touch screen.
From 10% and below, the machine will notify for wheel
replacement. When the wheel life arrives at 0%, it cannot
be used anymore to sharpen your skate. Replacement could
also be required when it is no longer taking away material
from the steel and/or giving an unsatisfying result. Only PROSHARP BAUER ADVANTEDGE accessories
will work on the machine. Non-PROSHARP BAUER components are not compatible. Attempting to use
non-compatible accessories will void warranty.
INSTALLING AND CHANGING A PROSHARP BAUER GRINDING WHEEL
WARNING!
After sharpening, grinding wheel are hot to the touch. Allow to cool off before
touching or wear protective gloves.
1. Open the front door of the machine using
touch screen.
WARNING!
machine plugged in presents a risk of
unexpected startup.
2. Turn off the power switch and unplug the
machine.
3. Unscrew the grinding wheel lock (counter-
clockwise) while holding the grinding
wheel in place. Wheel is snug, pull off
carefully without excessive force while
rocking the grinding wheel off the spindle.
GRINDING WHEELS AND WHEEL LIFE
Leaving the
4. Replace with a new grinding wheel, set
in place. Do not push on with force, just
place on the spindle and turn wheel lock
clockwise while holding grinding wheel
until snug.
5. Close front door, plug machine back in
and turn power back on. The motor pack-
age will now return to its home position.
Scan the QR code to get a further
step-by-step guide or consult your
PROSHARP App.
07