Prosharp BAUER ADVANTEDGE Maschinenhandbuch Seite 10

Clean the machine according to these instructions to reduce the risk of fire.
WARNING!
The machine will regularly notify you for a cleaning routine every 10, 30 or 50 pairs of skates you
sharpened. This reminder and the frequency can be managed in "Cleaning Schedule" menu inside the
"Settings" menu. You can also start the cleaning procedure manually by selecting the "Start Cleaning"
button inside the "Cleaning Schedule" menu, then follow the step-by-step instructions on the screen.
Machine should be cleaned out regularly to maintain optimum performance. Do not use any solvents
or chemical products in and around the machine. When starting the cleaning procedure:
1. The front door will automatically open after starting the
procedure. Note that the grinding wheel will stay on the
right side (home) position during the cleaning process.
2. Remove the internal dust tray carefully by disengaging
the 2 clips. Dispose all dust on this tray.
3. Use a vacuum to thoroughly vacuum at the top, sides
and around the edges inside the machine.
4. Replace the tray and secure it with the front clips.
5. Close the door.
Please note, excessive dust can and may void the warranty. Not cleaning the machine properly can
lead to issues and can cause fire. Please clean machine when prompted to maintain warranty. Turning
cleaning prompts off also voids warranty.
Additionally, a vacuum port is built on the left side of the machine to connect a 1¼ (32mm) vacuum
hose. Remove the side cover to access the vacuum port. This will further reduce the accumulation of
dust inside your machine but it does not replace the need for a proper cleaning routine like
described above.
• For new steel PROSHARP BAUER recommends 3 cycles with a FLAT Hollow Wheel followed by 4
cycles with your Hollow Wheel of choice. All grinding wheels are sold separately.
• FLAT Grinding Wheel: Whether prepping new steel, or refreshing damaged edges, our flat grinding
wheel will reset your blade so you can build your preferred hollow.
• For used steel PROSHARP BAUER recommends 3- 4 cycles with a your Hollow Wheel of choice.
• For player steel, the PROSHARP BAUER ADVANTEDGE is compatible for Size 6 Youth Steel up to
Size 15 Senior Steel.
• For goalie steel, the PROSHARP BAUER ADVANTEDGE is compatible for Size 10 Youth Steel up to
Size 12 Senior Steel.
• Please use the CL (Center Line) markings on the skate slot to center your steel for best results.
• To sharpen the blade only without the skate, please use the single blade holder sold separately.
10
CLEANING AND EMPTYING THE DUST TRAY
SHARPENING AND STEEL INFORMATION