USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the
button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
SWING
Press the
button until the
indicator light is illuminated on the control
panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air
flow.
Louver
Movement
TIMER
Press the
button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The
function allows you to program the unit for up to 7.5 hours of use.
SPEED
button repeatedly to change the speed between Ⅲ( High ) - Ⅱ( Medium ) - Ⅰ( Low ) .
Press the
EN
2