Use & Operation; Function Buttons - Honeywell CL152 Benutzerhandbuch

USE & OPERATION
CONTROL PANEL

FUNCTION BUTTONS

POWER
Press the or POWER button to turn the unit on. The cooler will start automatically at medium
speed. After a few seconds the speed will switch to low. To turn the unit off, press the button again.
SWING
Press the button until the
panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air
flow.
TIMER
Press the button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The
SPEED
Press the button repeatedly to change the speed between 3 (High) - 2 (Medium) - 1 (Low).
ION
Press the button until the ion indicator light is illuminated on the control panel .
Model without Ionizer
Model with Ionizer *^
indicator light is illuminated on the control
function allows you to program the unit for up to 7.5 hours of use.
EN
* Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
2
Louver
Movement