Maintenance Guide - ISE SY-T1507 Bedienungsanleitung

"MODE" KEY, in standby state, press this key can select circularly from the H-1 to H-3 three different
countdown mode operations.
• H-1. IS A TIME COUNTDOWN MODE.
• H-2. IS THE DISTANCE COUNTDOWN MODE.
• H-3. IS THE COUNTDOWN MODE OF CALORIE.
When choosing a variety of modes, can use the speed add and drop key to set the relevant countdown number
value, after the completion of the setting, press the "start" key to start the running machine.
PARAMETER SETTING IN 3 MODES
COUNTDOWN TIME SETTING, the initial time is 10:00 minutes, the
setting range is 5:00. 45:00 minutes, step 1:00.
COUNTDOWN DISTANCE SETTING, the initial distance is 1 km, the
set range is 1.0---6.0 km, step 1.
COUNTDOWN CALORIE SETTING, the initial calorie is: 50 kcal , set
a range of 20 ---999 kcal, step 10.
CYCLE SWITCHING ORDER IS: MANUAL, TIME, DISTANCE, CALORIE.
Proper maintenance is the only way to keep your running machine at its best forever, and incorrect maintenance
can damage or shorten its life.
1.-
Regularly remove dust to keep parts clean. It is necessary to clean both sides of the running machine,
which will reduce the accumulation of impurities under the running machine.
2.-
After each use of the running machine, clean the instrument and other parts of the sweat stains and debris
with clean towels and damp cloth. Be careful not to splash water on the electrical components and under
the running belt.
Do not use sandpaper or solvent to clean the running machine, the controller part can not be
3.-
Keep your treadmill in a clean, dry environment. Make sure the power is off and the plug is unplugged.
ENGLISH
9.
BEFORE CLEANING OR MAINTAINING PRODUCTS, PLEASE
UNPLUG THE POWER PLUG OF THE RUNNING MACHINE
directly exposed to the sun or damp, to avoid damage.
WARNING:
REMIND:

5. MAINTENANCE GUIDE