Key Function - ISE SY-T1507 Bedienungsanleitung

START UP. After 3 seconds countdown, it will start normally.
SAFETY LOCK FUNCTION. Pulling out the safety lock immediately shows that the "E7" the treadmill stops
quickly, and the alarm sounds appear. When the safety lock is put on, the electronic watch displays for 2 seconds
and the data is all cleared.

KEY FUNCTION

"START" KEY AND "STOP" KEY, in the running machine standby state, press the "start" key, speed display
"1.0", the running machine start. In the running state of the running machine , press the "stop" button, all the
data is cleared, the running machine return to manual mode after the stable stopping of running machine, the
running machine stops.
THE "+" AND "-" KEYS are adjusted for speed increasing and reduction. When setting parameters for running
machine, it can be used to adjust setting values.
The running machine can be used to adjust the speed after starting, step lKm/time, you can adjust to your own
speed at any time.
"SELECT" KEY, in standby state, press this key can select circularly from manual mode "1.0" to automatic
program PI-P12; manual mode is the default mode of the system, manual mode of the default speed is 1.0
km/h, the maximum speed is 12 km/h; after selecting the program mode, press the "start" key to start the
running machine, running machine automatically adjusts the speed according to the preset program.
SELECTION PROGRAM
The default runtime is 10 minutes. After selecting the program, the run time is set. Program segment of each
program is divided into 10 segments, and the runtime of each program segment is allocated equally. After the
runtime is completed, the motor stops and the meter is cleared. The following is the motion diagram of the 12
programs.
FORMULA
ENGLISH
8.
TIME
TIME SET /
PERIOD
0 PERIOD = RUN TIME AND DOWN TIME PERIOD
1