General Functions; User Management - Kettler Hot Ride+ Montageanleitung

3 Distance Display
This is the numeric indicator of the accumulated distance for the current workout or the re-
maining distance for an active distance interval segment. Distance can be displayed in either
kilometers (KM) or miles. The selection between KM or Miles can be done in Settings Mode.
4 Energy Display
This is the numeric indicator of the accumulated energy burned for the current workout. En-
ergy can be displayed in either KCAL or KJ. The selection bwteen KCAL or KJ can be done in
Settings Mode.
5 Level/Watt Display
Shows current resistance level in MANU-Mode or WATT in AUTO-Mode.
6 Profile Display
Shows training profile in levels (MANU-Mode) or in WATT (AUTO-Mode)

GENERAL FUNCTIONS

Sleep Mode – if no RPM signal or no key pressed after 4min, the console will enter Sleep
Mode. Pressing any key or start pedaling will wake up the display.
Software Updates – Information regarding software updated will be provided on
www.kettlersport.com

USER MANAGEMENT

To enter USER MANAGEMENT press WORKOUT button and navigate with +/- to USER.
To select a user (U1-4 press +/- button, confirm user with WORKOUT button to enter more
specific information and press WORKOUT button to save user settings. Press START/EN-
TER to continue.
You can define age, gender, height and weight. You can also enter a username by using any 3
letters that identify the user. It's recommended to use initials. U00 stands for Guest User,
please note that workout data for Guest User won't be stored.
ENGLISH 19