Intended Use; Safety Advice - BaSt-ING ValRemote Bedienungsanleitung

3.

Intended use

The ValRemote control of impact wrenches is a remote control developed by BaSt-Ing GmbH for
forestry. The ValRemote unit is only approved for impact wrenches approved by BaSt-Ing GmbH.
The following impact wrenches are currently approved:
Manufacturer Type designation
Milwaukee ONEFHIWF34
Milwaukee ONEFHIWF12
Notice:
The list of approved impact wrenches is subject to change. If you have any questions, please contact
BaSt-Ing GmbH via info@bast-ing.de or +49 (0) 8042/50631-0.
The intended application of the "ValRemote" is timber harvesting. Here he will used to lift trees on the
side facing away from the notch and thus fell the tree in the desired direction. It can also be used to
release chainsaws that have become stuck in a lying tree trunk.
Furthermore, the ValRemote control can be used in combination with the PullFast from BaSt-Ing.
4.

Safety advice

In the event of disregard for safety warnings, serious injuries can
result in death!
When working, wear a head protection combination, face protection, gloves, cut protection
clothing and all other protective clothing required for chainsaw work dress.
When working with the ValRemote, always observe the current UVV guidelines for chain-
saws and forestry work!
Make sure you have a good view of the felling unit, the tree, and the tree felling area while
operating the remote control.
Always use plastic or aluminum wedges as safety wedges when working with the
ValRemote.
– 12 –