Product Information - HAWA Concepta 40 Montageanleitung

HAWA-Concepta 40/50
2

Product information

Intended use
Pivot/slide-in hardware for laterally retractable wooden doors for cabinets or wall recesses.
Intended place of use
Dry internal areas and internal areas where condensation can occur, e.g. in the kitchen or bathroom, but without any significant chlo-
ride burden.
Technical data
Technical data as per planning and installation instructions 24728.
■
Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
Certificates are available for downloading at www.hawa.ch.
Article number
Articles are identified by a 5-digit number.
General notes
These instructions were created for assembling the hardware. Prior planning occurs in direct cooperation between Hawa AG and the
customer.
Assembly is illustrated using a HAWA-Concepta 40/50 Type 3 as an example.
Type 1
The document «Safety Instructions» (22991) is an integral component of these installation instructions.
Metric dimensions in mm apply - inches are for information only.
Please retain these instructions; replacements are available from info@hawa.ch.
Risk and residual risk hazard
If using HAWA-Concepta 40/50 to conceal electrical appliances, ensure compliance with the safety notes provided by the appliance
manufacturer (heat accumulation). If necessary, use an automatic shutoff device (e.g. Safety Box, www.halemeier.de).
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
3
---- -
32
Type 2 Type 3
9