HAWA Concepta 40 Montageanleitung Seite 8

1 Table of contents
Contents
1 Table of contents
2 Product information
3 Safety regulations
4 Abbreviations, symbols
5 Overviews
6 Calculation
7 Pre-assembly
8 Assembly
8
5.1 Overview: Left-hand systems
5.2 Overview: Connector 55 mm
5.3 Overview: Connector 110 with and without plinth (optional)
5.4 Overview: Position numbers
6.1 Calculation: Plan view dimensions
6.2 Calculation: Door handle height
6.3 Calculation: Hardware depth
7.1 Pre-assembly: Aligning the cabinet
7.2 Pre-assembly: Scissor and bar installation, left-hand systems
8.1 Assembly: Door; hinge pre-mounted to door
8.2 Assembly: Door; hinge pre-mounted to upright
8.3 Assembly: Fine adjustment of door upright angle 19 - 30 mm
8.4 Assembly: Positioning the stop shock absorber
8.5 Assembly: Closing door with scissor bearing
8.6 Assembly: Adjusting the door height
8.7 Assembly: Door gap fine adjustment
8.8 Assembly: Front depth fine adjustment
8.9 Assembly: Keeping the door open
Page
8
9
10
11
12
13
14
15
16
17
18
19
20
23
25
26
27
28
29
30
31
32