Seite 1
HAWA-Folding Concepta 25 Planungs- und Montageanleitung Beschlag für seitlich einschiebbare Falttüren bis 25 kg pro Tür. Instructions de conception et de montage Ferrure pour portes pliantes et escamotage latéral jusqu’à 25 kg par porte. Planning and installation instructions Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.
Seite 2
1 Inhaltsverzeichnis Inhalt Seite Inhaltsverzeichnis Produktinformation Abkürzungen, Symbole Übersichten Übersicht: Anlage links 2-türig LMB max. 1420 mm Übersicht: Anlage rechts 2-türig LMB max. 1420 mm Übersicht: Anlage links 3-türig LMB max. 2120 mm Übersicht: Bodenprofil 2-türig LMB max. 1420 mm (optional) Übersicht: Bodenprofil 3-türig LMB max.
Garnituren sind als links und rechts gekennzeichnet. Ausrichtbeschlag zur Stabilisierung von Schiebetüren verwenden. Für 3-türige Anlagen mit LMB 2120 mm wird eine Garnitur Hawa-Concepta 30/40/50 benötigt. Maximale zulässige Durchbiegung der Beschlagsmontageseite und Türe ± 2 mm. Maximale Durchbiegung des Möbeloberbodens 2 mm.
Seite 4
1 Sommaire Contenu Page Sommaire Informations sur le produit Abréviations, symboles Aperçus généraux Aperçu général : Installation à gauche, largeur intérieure max. de 1420 mm (2 portes) Aperçu général : Installation à droite, largeur intérieure max. de 1420 mm (2 portes) Aperçu général : Installation à...
Les dimensions applicables sont métriques - les dimensions en pouces ne sont fournies qu'à titre informatif. Conserver ces instructions ; en cas de perte, il est possible d'en obtenir un nouvel exemplaire sur le site Internet www.hawa.ch. Risques et risques résiduels Cette ferrure n’occasionne aucun risque, ni aucun risque résiduel.
1 Table of contents Contents Page Table of contents Product information Abbreviations, symbols Overviews Overview: Left-hand system, maximum clearance 1420 mm (4’7") (2-door) Overview: Right-hand system, maximum clearance 1420 mm (4’7") (2-door) Overview: 3-door left-hand system, maximum clearance 2120 mm (6’11") Overview: Floor profile, maximum clearance 1420 mm (4’7") (2-door) (optional) Overview: Floor profile, maximum clearance 2120 mm (6’11") (3-door) (optional) Overview of magnetic centring part (optional)
Sets are marked left and right. Use the straightening fitting for stabilizing sliding doors. A Hawa-Concepta 30/40/50 set is required for 3-door systems with a width clearance of 2120 mm. Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
Seite 8
1 Indice Indice Pagina Indice Informazioni sul prodotto Abbreviazioni, simboli Panoramiche Panoramica: Installazione a sinistra, LMB max 1420 mm (2 ante) Panoramica: Installazione a destra, LMB max 1420 mm (2 ante) Panoramica: Installazione a sinistra, LMB max 2120 mm (3 ante) Panoramica: Profilo a pavimento, LMB max 1420 mm (2 ante) (opzionale) Panoramica: Profilo a pavimento, LMB max 2120 mm (3 ante) (opzionale) Panoramica: Centraggio magnetico (opzionale)
Le guarniture sono segnalato a sinistra e a destra. Usare una guarnitura raddrizza-ante per la stabilizzazione di ante scorrevoli. Per sistemi a 3 ante con LMB 2120 mm è necessaria una guarnitura Hawa-Concepta 30/40/50. Flessione massima consentita del lato di montaggio della ferramenta e dell'anta ± 2 mm.
HAWA-Folding Concepta 25 Übersichten / A perçus généraux / O verviews / P anoramiche Übersicht: Anlage links 2-türig LMB max. 1420 mm Aperçu général : Installation à gauche, largeur intérieure max. de 1420 mm (2 portes) Overview: Left-hand system, maximum clearance 1420 mm (4’7 ") (2-door)
Seite 12
HAWA-Folding Concepta 25 Übersicht: Anlage rechts 2-türig LMB max. 1420 mm Aperçu général : Installation à droite, largeur intérieure max. de 1420 mm (2 portes) Overview: Right-hand system, maximum clearance 1420 mm (4’7 ") (2-door) ---- - Panoramica: Installazione a destra, LMB max 1420 mm (2 ante)
Seite 13
HAWA-Folding Concepta 25 Übersicht: Anlage links 3-türig LMB max. 2120 mm Aperçu général : Installation à gauche, largeur intérieure max. de 2120 mm (3 portes) Overview: 3-door left-hand system, maximum clearance 2120 mm (6’11 ") ---- - Panoramica: Installazione a sinistra, LMB max 2120 mm (3 ante)
Seite 14
HAWA-Folding Concepta 25 Übersicht: Bodenprofil 2-türig LMB max. 1420 mm (optional) Aperçu général : Profil de sol, largeur intérieure max. de 1420 mm (2 portes) (en option) Overview: Floor profile, maximum clearance 1420 mm (4’7 ") (2-door) (optional) ---- -...
Seite 15
HAWA-Folding Concepta 25 Übersicht: Bodenprofil 3-türig LMB max. 2120 mm (optional) Aperçu général : Profil de sol, largeur intérieure max. de 2120 mm (3 portes) (en option) Overview: Floor profile, maximum clearance 2120 mm (6’11 ") (3-door) (optional) ---- -...
Seite 16
HAWA-Folding Concepta 25 Übersicht: Zentrierteil magnetisch (optional) Aperçu général de la pièce de centrage magnétique (en option) Overview of magnetic centring part (optional) Panoramica: Centraggio magnetico (opzionale)
Seite 17
HAWA-Folding Concepta 25 Übersicht: Schliesskloben zu Drehstangenschloss mit Drehstange ø 8 mm (optional) Aperçu : gâche pour serrure espagnolette avec tige pivotante ø 8 mm (en option) Overview: Keeper for espagnolette lock with ø 8 mm ( ") espagnolette (optional) - --- - Panoramica: cavallotto di chiusura per serratura ad asta rotante ø...
Seite 18
HAWA-Folding Concepta 25 Übersicht: Verstärkungsprofil und Verbindungsplatte für Möbeloberboden (optional) Aperçu général du profil de renforcement de la plaque de raccordement pour élément supérieur de meuble (en option) Overview of the reinforcement profile and connecting plate for cabinet tops (optional) Panoramica: Profilo di rinforzo e piastra di giunzione per cielo del mobile (opzionale) Möbeloberboden bei Doppelanlagen ohne Mittelwand muss verstärkt werden!
Seite 19
HAWA-Folding Concepta 25 Übersicht Positionsnummern Aperçu général des numéros de position Overview of position numbers Panoramica dei numeri di posizione 24028 24027 24744 24745 24070 24913 24071 24914 25484 25486 25485 25487 24746 24747 24170 [10] 24171 [11] 24021 [12]...
Seite 22
HAWA-Folding Concepta 25 Planung / P lanification / P lanning / P rogettazione Planung: Vorliegende Schrankfront mit Bodenprofil Planification : Façade d'armoire coulissant devant le corps du meuble avec profil au sol Planning: Front-running cabinet front with bottom profile Progettazione: Frontale davanti al corpo dell'armadio con profilo a pavimento demontierbar / démontable /...
Seite 24
HAWA-Folding Concepta 25 Planung Nischenabdeckung ohne Möbelboden Planification dissimulation de niche sans élément inférieur de meuble Planning recess cover without a cabinet base Progettazione mascheratura della nicchia senza fondo del mobile...
Seite 26
HAWA-Folding Concepta 25 Planung Türen von der Arbeitsplatte bis Oberkante Schrank Planification portes allant du plan de travail jusqu'au bord supérieur de l'armoire Planning doors from the worktop up to the top cabinet edge Progettazione ante del piano di lavoro fino al bordo superiore dell'armadio...
HAWA-Folding Concepta 25 Berechnung / C alcul / C alculation / C alcolo Berechnungen Masse Grundriss 2-türig max. 1420 mm Calculs des dimensions, plan d'ensemble max. de 1420 mm (2 portes) Calculations for floor plan dimensions max. 1420 mm (4’7 ") (2-door)
Seite 29
Für die Berechnung der Einzeltüren siehe Montageanleitung: 25737 HAWA Concepta 25/30 und 25738 HAWA Concepta 40/50. Voir instructions de montage pour calculer les portes à un vantail : 25737 HAWA Concepta 25/30 et 25738 HAWA Concepta 40/50. For the calculation of single doors see installation instructions: 25737 HAWA Concepta 25/30 and 25738 HAWA Concepta 40/50.
Seite 30
HAWA-Folding Concepta 25 Berechnungen Bohrposition Calculs position de perçage Calculations drill position Calcoli delle posizioni di foratura Aussenseite / Côté extérieur / External face / Lato esterno...
Seite 31
HAWA-Folding Concepta 25 Korpusseite / Côté corps de meuble / Cabinet face / Lato mobile T2 66 – T2 77 – 1250 mm - 1850 mm (4’1 " - 6’ ") 370 mm (1’2 ") 555 mm (1’9 ") ---- -...
Seite 32
HAWA-Folding Concepta 25 Bohrposition Türen mit Türhöhe 1250 mm - 1850 mm Perçage portes de hauteur 1250 mm - 1850 mm Door with door height 1250 mm - 1850 mm (4’1 "- 6’ ") ---- - ---- - Posizione di foratura ante con altezza 1250 mm - 1850 mm...
Seite 33
HAWA-Folding Concepta 25 Türen mit Türhöhe 1851 mm - 2600 mm Perçage portes de hauteur 1851 mm - 2600 mm Door with door height 1851 mm - 2600 mm (6’ "- 8’6 ") Ante con altezza 1851 mm - 2600 mm...
Seite 34
HAWA-Folding Concepta 25 Berechnungen und Bearbeitung der Profile Calculs calcul et usinage des profils Calculations calculating and processing profiles Calcoli e lavorazione dei profili Empfohlen: LMB an zusammengebautem Objekt messen / Recommandation: mesurer la largeur intérieure (LMB) au niveau de l’objet monté /...
HAWA-Folding Concepta 25 Vormontage / P rémontage / P re-assembly / M ontaggio preliminare Vormontage Drehtüre Prémontage porte pivotante Pre-assembly of the pivot door Montaggio preliminare anta girevole Anzahl / Nombre / Number Nur mit Bodenprofil Quantità Seulement avec profil de sol Only with bottom profile 1250 mm - 1850 mm (4’1 "...
HAWA-Folding Concepta 25 Vormontage Falttüre Prémontage porte pliante Pre-assembly of folding door Montaggio preliminare anta a libro Anzahl / Nombre / Number Nur mit Bodenprofil Quantità Seulement avec profil de sol Only with bottom profile 1250 mm - 1850 mm (4’1 " - 6’ ")
Seite 37
HAWA-Folding Concepta 25 Anzahl / Nombre / Number Quantità 1250 mm - 1850 mm (4’1 " - 6’ ") ---- - ---- - 1851 mm - 2600 mm (6’ " - 8’6 ")
HAWA-Folding Concepta 25 Vormontage Aussenseite Prémontage côté extérieur Pre-assembly exterior side Solo con profilo a pavimento...
Seite 39
HAWA-Folding Concepta 25 Türdicke S Bürstenhöhe Epaisseur de porte S Hauteur de joint brosse Door thickness S Brush height Spessore anta S Altezza spazzola 26 mm - 22 mm (1 " - ") 10 mm ( ") ---- - ---- - 22 mm - 19 mm ( "...
HAWA-Folding Concepta 25 Vormontage: Ausrichten des Schrankes Prémontage : Ajustement de l’armoire Pre-assembly: Aligning the cabinet Montaggio preliminare: Allineamento dell'armadio Der Schrank muss nivelliert und an den Baukörper (Boden, Wand, Decke) geschraubt werden! L’armoire doit être mise à niveau et vissée sur le corps de bâtiment (sol, mur, plafond)!
HAWA-Folding Concepta 25 Montage / M ontage / A ssembly / M ontaggio Montage Schere und Holm Anlage links Montage ciseaux et montant pour installation à gauche Assembly scissor and bar installation, left-hand systems Montaggio forbice e longherone, installazione a sinistra...
Seite 45
HAWA-Folding Concepta 25 Scherenlager einmitten und festschrauben Centrer et visser le palier ciseau Center scissor bearing and screw in place Centrare il supporto forbice e fissarlo con viti...
HAWA-Folding Concepta 25 Montage Schere und Holm Anlage rechts Montage ciseaux et montant pour installation à droite Assembly scissor and bar installation, right-hand systems Montaggio forbice e longherone, installazione a destra...
Seite 48
HAWA-Folding Concepta 25 Scherenlager einmitten und festschrauben Centrer et visser le palier ciseau Center scissor bearing and screw in place Centrare il supporto forbice e fissarlo con viti...
HAWA-Folding Concepta 25 Montage Laufschiene mit Bogenstück Montage rail de roulement avec élément courbe Assembly top track and curve piece Montaggio binario di scorrimento con curva...
HAWA-Folding Concepta 25 Montage: Feineinstellung Drehtüre Montage : Réglage fin porte pivotante Assembly: Pivot door fine adjustment Montaggio: Regolazione di precisione anta girevole...
Seite 55
HAWA-Folding Concepta 25 Kontrolle einmitten Scherenlager Contrôler la position centrale du palier ciseau Check scissor bearing centering Controllare il centraggio del supporto forbice...
Seite 56
HAWA-Folding Concepta 25 Mittleres Scharnier lösen zum Einstellen der Türfuge Desserrer la charnière centrale pour régler la jointure de porte Loosen the center hinge to adjust the door gap Allentare la cerniera di mezzo per regolare la fuga anta lösen / régler /...
Seite 57
HAWA-Folding Concepta 25 ■ DE 1. Türe schliessen. 2. Falls nötig Holmneigung mittels Scherenlager anpassen bis Türe korrekt schliesst. 1. Fermer la porte. 2. Si nécessaire, ajuster l’inclinaison du montant au moyen du support de ciseaux jusqu’à ce que la porte ferme correctement.
HAWA-Folding Concepta 25 Montage: Feineinstellung Falttüre Montage : Réglage fin porte pliante Assembly: Folding door fine adjustment Montaggio: Regolazione di precisione anta a libro...
HAWA-Folding Concepta 25 Optionales / E n option / O ptional / O ptional Optionales: Bodenprofil En option : Profil de sol Optional: Bottom profile Optional: Profilo a pavimento...
HAWA-Folding Concepta 25 Optionales: Zentrierteil magnetisch En option : Pièce de centrage magnétique Optional: Magnetic centring part Optional: Centraggio magnetico...
HAWA-Folding Concepta 25 Optionales: Schliesskloben zu Drehstangenschloss mit Drehstange ø 8 mm En option : gâche pour serrure espagnolette avec tige pivotante ø 8 mm Optional: Keeper for espagnolette lock with ø 8 mm espagnolette ( ") - --- - Optional: cavallotto di chiusura per serratura ad asta rotante ø...
HAWA-Folding Concepta 25 Optionales: Montage Verbindungsplatte En option : Montage de la plaque de raccordement Optional: Fitting the connecting plate Optional: Montaggio piastra di giunzione...
HAWA-Folding Concepta 25 Optionales: Montage Verstärkungsprofil Möbeloberboden En option : Montage du profil de renforcement pour élément supérieur de meuble Optional: Fitting the cabinet top reinforcement profile Optional: Montaggio profilo di rinforzo cielo mobile...
HAWA-Folding Concepta 25 Optionales: Möbeloberboden ausrichten En option : Ajustement de l’élément supérieur de meuble Optional: Aligning the cabinet top Optional: Allineamento cielo mobile Die nachfolgenden Abbildungen und Messung M verstehen sich mit geschlossenen Türen. Les illustrations ci-dessous et la mesure M s’entendent avec portes fermées.
Seite 72
Toute transmission de ce document à un tiers, toute reproduction, quels qu'en soient le type et la forme - même par extraits - et toute exploitation et/ou communication de son contenu, sont formellement interdits sans accord préalable écrit de la part de la société Hawa Sliding Solutions AG, excepté pour un usage interne.