Cleaning And Maintenance; Technical Data - MPM MWC-05 Bedienungsanleitung

EN

CLEANING AND MAINTENANCE

1. Before you start cleaning, make sure that the device is disconnected from mains.
2. Take out a squeezer's cone, a strainer, a container for juice and wash them in running water. After
washing, accessories should be thoroughly rinsed and dried up.
3. The case can be cleaned with a wet cloth with detergent. It cannot be submerged into water.
4. No sharp objects, abrasive pastes, solvents or other strong chemical agents can be used for clean-
ing - their use may cause damage of the device.
5. After the unit has been washed and dried, fasten the protective cover.

TECHNICAL DATA

Technical specifications are given on the product nameplate.
Length of mains cable: 0,88 m
ATTENTION! MPM reserves its rights to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
9