Aux In- Connection; Ipod Docking Connection - Medion MD 81834 Handbuch

CD/MP3 Micro Audio System MD 81834

AUX IN- connection

AUX
You can use the socket (press the
AUX
until appears in the display) for connection to an
external audiosignal (e.g. from a cassette recorder).
Switch the player to standby mode.
Switch your external unit off.
Plug the end of the phono cable (not supplied) into
the AUX input socket on the right-hand side of the
player (note correct polarity of right and left
channels).
Plug the other end of the phono cable into your
external unit.
Switch your external unit on.
Switch your player on using the
FUNCTION
Press the
on the player until "
audio signal from your external unit will now be
reproduced.
Connecting the subwoofer
Insert the end of the connection cable (
WOOFER
) in the socket (
SUBWOOFER
the . Connect the other end of the
connection cable to the appliance (
TO WOOFER
using the socket (
now connected to the appliance.

iPOD docking connection

You can connect an iPOD docking station to the player.
You can use different adapters with this docking station .
The iPOD docking station also has a
on the rear side.
As illustrated, insert the iPOD docking station in the
DOCKING IN
( ) socket in the direction of the arrow.
Then turn the screw of the iPOD docking station in a
clockwise direction. The iPOD docking station can
now be used.
Start of operation
FUNCTION
STANDBY
button on the remote control or
AUX " appears in the display. The
CONNECT
FROM MAIN
) on the rear of
CONNECT MAIN
). The subwoofer is
OUT) output
(VIDEO
button
EN
button.
)
13