Internal Calls - AUDIOLINE Bullet 200 Bedienungsanleitung

Telephoning

Internal calls

Making an internal call
INT
Press the INT key. If there is only one handset registered to the base (desktop phone) the other device will ring at
once. In case of some more registered handsets you will have to enter the respective internal telephone number
(1...X). For an internal call to the desktop telephone dial "0".
External call during an internal connection / Brokering / Transfer / Conference
An incoming call durin an internal connection is signalled by an attention tone. On the handset's and the desktop phone's display the cal-
ling number or the name will be shown. On the desktop phone the handsfree button flashes in addition.
On the desktop telephone
INT
On the handset
or
INT
(Costs for call from german landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
Press the INT key.
The internal call is put on hold and you can speak to the external caller.
Brokering
Press the INT key to toggle between the internal and the external subscriber (brokering).
Transfer
Replace the handset while connected to the internal subscriber - the external call will be transferred
to the handset.
Conference
Press and hold the INT key for approx. 2 s. The 3-party conference is established. You can establish
a conference with 2 internal and 1 external subscriber.
Press the Off Hook button or the handsfree button. The internal call will be ended.
/
Press the INT key.
The internal call is put on hold and you can speak to the external caller.
Brokering
Press the INT key to toggle between the internal and the external subscriber (brokering).
Transfer
Press the On Hook button while connected to the internal subscriber - the external call will be trans-
ferred to the handset.
Conference
Press and hold the INT key for approx. 2 s. The 3-party conference is established. You can establish
a conference with 2 internal and 1 external subscriber.
Service-Hotline Germany: Tel. 0180 5 001388
GB
11