Aqua Medic Turboflotor 5000 Shorty Compact Bedienungsanleitung Seite 15

4. Exploded parts diagram
Ocean Runner pumps, ph series
1. Lid of pump housing
2. Hose connection ½"
3. O-ring
4. Rubber bearing (2 pcs.)
5. Ceramic shaft
5. Mounting:
The pump may only be installed submerged. The maximum
submergence is 1 m. However, it is not self priming and has to be
installed below the water surface level. If used as a power head
pump, we recommend to remove the hose connection (2) on the
suction side and fit the filter basket (12) in front of the pump.
Please take care that the pump does not run dry.
The base plate (13) with the rubber suckers (14) can be fitted to the
pump on 3 sides so the outlet position can be adjusted.
After setting up the pump, ensure you can always reach the power
plug.
6. Washers (2 pcs.)
7. Rotor / magnet
8. O-ring
9. Motor housing
10. Filter sponge
11. Bayonet lock
12. Filter basket
13. Holding plate
14. Rubber sucker
15. Lid of filter basket
15