Aqua Medic Turboflotor 5000 Shorty Compact Bedienungsanleitung Seite 14

1. Features
The Ocean Runner PH series of magnetically coupled power head pumps are very quiet in
operation. They have fully encapsulated synchronous motors and can operate completely safely
either submerged or out of water. The polished ceramic shaft and bearing is practically wear
resistant, ensuring a long operating life. The pumps can easily be taken apart for cleaning. All
materials are salt water resistant.
Important note:
Only operate the pump at the voltage shown on the product label.
2. Table 1: Technical Data
Model
Line voltage:
Power consumption:
Maximum flow:
Maximum head:
Hose connection:
Cable length:
Protection rating:
Max. depth:
Max. water
temperature:
3 . Connections
Suction side: The suction side may be connected with flexible hose, using the hose fitting (2)
included. If the pump is used as a current pump submerged in the aquarium, the filter basket
(12, 15) and the sponge (10) have to be used.
Pressure side: The pressure side can be connected with a flexible hose, using the hose fitting
(2) included. This hose fitting must also be fitted if the pump is used as a pure current pump.
If the pump is used as return pump, it can be directly connected to PVC (25 mm, 1") pipe by
using an optional threaded connector.
14
Ocean Runner
PH 2000
230 V~/50 Hz
19 watts
2,000 l/h (33 l/min.)
1.5 m (5.0 ft)
½"
2.8 m (9 ft)
IP68
1 m (3 ft)
35°C
Ocean Runner
PH 2500
230 V~/50 Hz
37 watts
2,500 l/h (40 l/min.)
2.6 m (8.6 ft)
½"
2.8 m (9 ft)
IP68
1 m (3 ft)
35°C
Ocean Runner
PH 3000
230 V~/50 Hz
43 watts
3,000 l/h (50 l/min.)
1.6 m (5.3 ft)
½"
2.8 m (9 ft)
IP68
1 m (3 ft)
35°C