Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stand-alone mode
Sound control
Via the integrated microphone the unit can perfectly reproduce the 30 show programs to the rhythm of the
music (sufficient bass provided).
To be able to operate the sound control in standalone mode, the device must be set to Mast.
1
Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
2
Now use the buttons UP and DOWN to adjust the microphone sensitivity to the volume of the music
(Se00 = low, Se99 = high).
Automatic mode
In automatic mode, 30 show programs are available that run at an adjustable speed.
To be able to operate the automatic mode in standalone mode, the device must be set to Mast.
1
Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with ENTER again.
2
Now use the buttons UP and DOWN to adjust the running speed of the program from SP1 (slow) to SP9
(fast). Confirm with ENTER.
Preset colors
In the Colo mode the device will constantly emit one of 7 preset colors.
1
Press the MENU button so many times until Colo is indicated in the display. Confirm with the ENTER
button.
2
Use the buttons UP and DOWN to set the desired color (CO1 – CO7). Confirm with the ENTER button.
Individual color mix
In the color mode Manu each LED can be adjusted in intensity. The device will constantly emit the adjusted
color.
1
Press the MENU button so many times until Manu is indicated in the display. Confirm with the ENTER
button.
2
Now the display indicates Red for the color red and the corresponding intensity value. Use the buttons
UP and DOWN to adjust the desired intensity.
3
Confirm with the ENTER button. Now the color green can be adjusted and then blue.
Display reverse
To invert the display by 180°, press the MENU button so many times until dISP is indicated in the display
and confirm with the ENTER button. Use the buttons UP or DOWN to select dSIP and confirm with ENTER.
Select dISP to return to the default setting.
Indicate software version
To indicate the version number of the firmware (operating system of the unit), press the button MENU so
many times until Ver is indicated in the display. Confirm with the ENTER button. The version will be indicated
in the display.
Reset to default settings
The device can be reset to default settings. Press the MENU button so many times until rset is indicated in
the display. Confirm with the ENTER button.
26/32
00151626, Version 1.0
Werbung
