Step 8; Final Check; Setting For Static And Rotating Movements Of The Pole - Royalbeach Rbsports Rb 35322 Bedienungsanleitung

INHALT ASSEMBLY/SETTING
GB
➞ After you confirm the pole is vertical, we should use the steel bar to fasten the adjuster. Tighten the lock nut with spanner until
it is really firm. (s. Picture 1 and 2)
Picture 1

Step 8

Final check

➞ Tighten pole adjuster with spanner until it is really firm. Check for movement and retighten if there is any movement. Fit adjuster cover up,
press in the two sprung pins ad lock in place.
➞ Please try to move and feel if the pole is stable when you removing.
➞ If you feel that is stable, ok, now the last step is to slid the adjuster cover up, screw it to the adjuster screw hole.
➞ Now the dancing pole is ready for use
!
NOTICE!
Make sure the ceiling dome is 100% flat on the ceiling (all the way around) before and after you tighten up the adjuster rod.
This could prevent falling over and protect you.
Setting

Setting for static and rotating movements of the pole

➞ To rotate the rod, loosen the two Allen screws on the lower retaining washer (7).
DANCING POLE
14
Picture 2