Step 5; Put The Pole Support Dome Onto The Height Adjuster; Step 6; Tighten The Dome To Ceiling - Royalbeach Rbsports Rb 35322 Bedienungsanleitung

ASSEMBLY INHALT

Step 5

➞ Put the top retaining washer (6) onto the height adjustment.
NOTE!
1. For this step, use a small ladder.
2. For this assembly step, a second person is absolutely necessary.

Step 6

6.1 Put the Pole support Dome onto the height adjuster (6)

➞ Screw the height adjustment by hand until the top retaining washer (6) sits on the ceiling.
ATTENTION!
Make sure that the upper support plate (6) is currently sitting.
Make sure that the pole is vertical.
For this, use a spirit level.
When the pole is wrong, which can be used to slip off
lead during training (s Picture 1, 2 and 3).
Picture 1

Step 7

➞ Then you should have visual inspectionof vertical on the pole, or you can use other vertical tools to check if the pole is vertical
(s. Picture 1, Picture A, B, C).
➞ After you confirm the pole is vertical, we should use the steel bar to fasten the adjuster.
Bild 1
Picture 2
Bild A Bild B
Picture3
Bild C
6
DANCING POLE
13
GB